Home > Diesel Water-Methanol Injection Kits > Vehicle Specific Kits
Choose a sub category:
Chevy/GMC Dodge Ford
VW TDI
Sort By:
Page of 1
Snow Performance 6.7 Cummins POWER-MAX Water-Methanol Injection kit Snow Performance Ford Powerstroke POWER-MAX Water-Methanol Injection kit
POWER-MAX™ 5.9 Cummins
Our Price: $699.99
POWER-MAX™ 6.7 Cummins
Our Price: $699.99

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Cummins! The Snow Performance POWER-MAX™ is available for all Cummins applications and comes with a proprietary Injection boot for a clean custom install for your water-meth nozzles. The POWER-MAX uses a progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability.

New for 2015, the POWER-MAX™ introduces the VC-50 Controller. The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a adjustable 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen.


Benefits:

  • Made In USA
  • Reduced EGTs 100-300 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
  • New Prime Feature Ensures Water-Methanol In Lines With Push of A Button
  • 2 Fault Modes (Clogged Line/Broken Line)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Progressive VC-50 Controller (52 mm gauge)
  • Pig Tail Wire Harness
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running 6.7 Cummins! The Snow Performance 6.7 Cummins POWER-MAX™ water-methanol injection kit is available for all Cummins applications and comes with a proprietary injection boot for a clean custom install for your water-meth nozzles. The POWER-MAX uses a progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and 6.7 Cummins performance improvements over a wide range for improved drivability & Cummins power.

New for 2015, the POWER-MAX™ introduces the VC-50 Controller. The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a adjustable 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen.


Benefits:

  • Made In USA
  • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
  • Reduced EGTs 100-300 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
  • New Prime Feature Ensures Water-Methanol In Lines With Push of A Button
  • 2 Fault Modes (Clogged Line/Broken Line)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Progressive VC-50 Controller (52mm gauge)
  • Pig Tail Wire Harness
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Powerstroke! The Snow Performance POWER-MAX™ is available for all Powerstroke applications and comes with a proprietary Injection boot for a clean custom install for your water-meth nozzles. The Ford Powerstroke POWER-MAX™ water-methanol injection kit uses a progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and powerstroke performance improvements over a wide range for improved drivability.

New for 2015, the POWER-MAX™ introduces the VC-50 Controller. The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a adjustable 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen.


Benefits:

  • Made In USA
  • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
  • Reduced EGTs 100-300 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
  • New Prime Feature Ensures Water-Methanol In Lines With Push of A Button
  • 2 Fault Modes (Clogged Line/Broken Line)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Progressive VC-50 Controller (52 mm gauge)
  • Pig Tail Wire Harness
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty
Snow Performance Duramax POWER-MAX Water-Methanol Injection Kit Snow Performance Ram EcoDiesel POWER-MAX Water-Methanol Injection kit
MPG-MAX™ VW TDI
Our Price: $799.99

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Duramax! The Snow Performance POWER-MAX™ is available for all Duramax performance applications and comes with a proprietary Injection boot for a clean custom install for your water-meth nozzles. The Snow Performance Duramax POWER-MAX™ water-methanol injection kit uses a progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and Duramax diesel performance improvements over a wide range for improved drivability & Duramax power.

New for 2015, the POWER-MAX™ introduces the VC-50 Controller. The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a adjustable 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen.


Benefits:

  • Made In USA
  • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
  • Reduced EGTs 100-300 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
  • New Prime Feature Ensures Water-Methanol In Lines With Push of A Button
  • 2 Fault Modes (Clogged Line/Broken Line)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Progressive VC-50 Controller (52mm gauge)
  • Pig Tail Wire Harness
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty

Get 50 HP, 111 lb-ft of torque, 4 pounds of boost, increased fuel economy, and decreased regen from a cooling running EcoDiesel! The POWER-MAX Water-methanol injection system from Snow Performance uses a progressive controller that commands two stages of water-meth that proportionally inject more or less according to boost pressure. Start and full points on the Ram EcoDiesel POWER-MAX water-methanol injection kit are adjustable for engagement and delivery curve to match what the engine requires; increasing EcoDiesel performance. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and EcoDiesel performance improvements over a wide range for improved drivability.

New for 2015, the POWER-MAX introduces the VC-50 Controller. The VC-50 offers the funcunality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen.


Benefits:

  • Made In USA
  • Reduced EGTs
  • Increased HP + Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
  • Progressive Water-Methanol
Features:
  • Boost Gauge and Adjustable Progressive Boost Activated Controller
  • 7 Color OLED Screen Displays Boost, Injection Percentage, Injection Error (s), Prime Button, Second Stage Activation
  • New Prime Feature Ensures Water-Methanol In Lines With Push of A Button
  • EcoDiesel Injection Boot (No Drilling For Nozzles!)
  • Dual Stage Water-Methanol Technology
  • Nickel Plated Metal Fittings
  • Industry Leading 300 PSI UHO Pump For More Pressure Than The Competition
  • Your Choice of Red, Blue, or Black Methanol Resistant High Temp Nylon Tubing
  • 2 Proprietary Hypersonic™ Nozzles For The Best Atomization On The Market
Whats In The Box:_
  • 300 PSI UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20' ¼ Inch High Temp Nylon Tubing
    • 36" High pressure Boost Line
  • Progressive VC-50 Controller (52mm gauge)
  • Pigtail Harness
  • EcoDiesel Injection Boot/Hose Clamps
  • Dual Nozzle Upgrade
  • POWER Solenoid Upgrade
  • Bulkhead Fitting To Tap Into Stock Windshield Washer Reservoir
  • 2 Nozzle Holder/Check Valve Combo
  • 2 Hyper-Sonic™ Nozzles
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on RAM EcoDiesel
  • Snow Performance 1-Year Warranty
The Snow Performance MPG-MAX™ VW TDI water-methanol injection system provides fuel economy increases of 5%-15%, 35+ HP, and 40 + lb. ft increase in torque to your TDI with NO TUNING REQUIRED! The TDI MPG-MAX system uses a new injection management controller that allows for a small spray of water/methanol to be injected across the power band. This provides an increase in combustion efficiency which provides more power without injecting more diesel fuel. This increase in efficiency translates into an increase in fuel economy. Independent testing by Diesel World Magazine showed fuel economy increases of 5%-15% (4 MPG on the TDI) and power increases of 35 hp/ 40 lb. ft. in a 2010 Jetta TDI. The MPG-MAX system has a secondary output that is used to activate a Power Mode. This introduces a second phase of injection. A larger nozzle is used to inject more fluid to make more power. The Power Mode activation point is adjustable for best performance. This allows for more injection when more power is needed. Also, the system has an LCD screen that displays boost and injection pump output. This means a savings of $200-300 in gauges you don’t have to buy.

Methanol has an ignition temperature 80 degrees hotter than diesel fuel. This means that methanol doesn’t pre-ignite your diesel fuel, and importantly doesn’t change timing. This kit comes with a heavy duty pump that delivers strong consistent injection performance and a 2.5 gallon reservoir for a clean trunk mounted install.
Benefits:

1. Will not adversely effect PM filter (particulate matter filter) like most other power adders.
2. Adds 35+HP safely.
3. Doesn't leave a “signature” on vehicles computer so warranty remains 100% intact
4. Comes complete with 2.5 Gallon Reservoir Upgrade
5. The most advanced system on the market – 2 Hyper-Sonic Nozzles controlled independently for smooth power always.
6. The only system proven to improve fuel economy.
7. Dash mounted module – displays real time – no need for gauges.

Whats In The Box:

  • 300 PSI UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20' ¼" High Temp Nylon Tubing
    • 36" High pressure Boost Line
    • 3' (Black) Wire Loom
  • Terminated MPG-MAX Controller
  • Terminated Weather Tight Connector Harness
  • (2) Power Solenoid Upgrades
  • 2.5 Gallon Reservoir Upgrade
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Hyper-Sonic Nozzles
  • Required Hardware Needed For Installation
  • Comprehensive Instructions to Install on VW TDI
  • Snow Performance 1-Year Warranty
Snow Performance MPG-MAX 5.9 Cummins Water-Methanol Injection Kit Snow Performance MPG-MAX 6.7 Cummins Water-Methanol Injection Kit
POWER-MAX™ VW TDI
Our Price: $799.99
MPG-MAX™ 5.9 Cummins
Our Price: $949.99
MPG-MAX™ 6.7 Cummins
Our Price: $949.99
The all new Snow Performance POWER-MAX™ VW TDI water-methanol injection system provides all the benefits of the MPG-MAX VW TDI system (fuel economy increases of 5%-15%, 35+ HP, and 40 + lb. ft increase in torque) with a new gauge style controller! to your TDI with NO TUNING REQUIRED! The TDI POWER-MAX system uses a new injection management controller that allows for a small spray of water/methanol to be injected across the power band. This provides an increase in combustion efficiency which provides more power without injecting more diesel fuel. This increase in efficiency translates into an increase in fuel economy. Independent testing by Diesel World Magazine showed fuel economy increases of 5%-15% (4 MPG on the TDI) and power increases of 35 hp/ 40 lb. ft. in a 2010 Jetta TDI with NO TUNING REQUIRED! The POWER-MAX system has a secondary output that is used to activate a Power Mode. This introduces a second phase of injection. A larger nozzle is used to inject more fluid to make more power. The Power Mode activation point is adjustable for best performance. This allows for more injection when more power is needed. Also, the system has an 52mm standard gauge pod controller with a O-LED screen displaying boost, percentage of injection, and power mode activation directly on the adjustable 7 color (red, blue, green, yellow, orange, purple, white) screen. This means a savings of $200-300 in gauges you don’t have to buy.

Methanol has an ignition temperature 80 degrees hotter than diesel fuel. This means that methanol doesn’t pre-ignite your diesel fuel, and importantly doesn’t change timing. This kit comes with a heavy duty pump that delivers strong consistent injection performance and a 2.5 gallon reservoir for a clean trunk mounted install.
Benefits:

1. Will not adversely effect PM filter (particulate matter filter) like most other power adders.
2. Adds 35+HP safely.
3. Doesn't leave a “signature” on vehicles computer so warranty remains 100% intact
4. Comes complete with 2.5 Gallon Reservoir Upgrade
5. The most advanced system on the market – 2 Hyper-Sonic Nozzles controlled independently for smooth power always.
6. The only system proven to improve fuel economy.
7. Dash mounted module – displays real time – no need for gauges.

Whats In The Box:

  • 300 PSI UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20' ¼" High Temp Nylon Tubing
    • 36" High pressure Boost Line
    • 3' (Black) Wire Loom
  • VC-50 Controller Controller
  • Pigtail Harness
  • (2) Power Solenoid Upgrades
  • 2.5 Gallon Reservoir Upgrade
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Hyper-Sonic Nozzles
  • Required Hardware Needed For Installation
  • Comprehensive Instructions to Install on VW TDI
  • Snow Performance 1-Year Warranty
The only system proven to increase 5.9 Cummins performance & fuel economy in all load states – empty or while towing. The Snow Performance MPG-MAX™ is available for all 5.9 Cummins applications and comes with a proprietary injection boot for a clean custom install. The Snow Performance MPG-MAX 5.9 Cummins water-methanol injection kit utilizes a fully adjustable progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure and EGTs. Proportionally injecting according to boost/EGTs gives a unparalleled delivery of water-methanol for all towing applications and provides the largest increases in Cummins MPG and cooling.

Built in modes (Power/Towing) allow the user to seamlessly switch between two programs for daily driven use (Power Mode) and while the vehicle is towing (Tow Mode).
The net effect is smooth power in all engine load states with no combustion quench resulting in a Fuel Economy Increase of 1-3 MPG, HP increase 65+, and reduced EGTs (100-350 F). The MPG-MAX offers true plug & play functionality that will not affect the electronics or the warranty of the vehicle. Complete with heads up adjustable LCD screen displaying boost, EGT temps, percentage of injection, and second stage activation for accurate monitoring and on the fly adjust-ability!

Benefits:

  • Made In USA
  • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
  • Increased Fuel Economy
  • Reduced EGTs 100-350 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Digital Variable Mapping Controller
  • EGT Probe
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Snow Performance Injection boot (Rated to 65 PSI)
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty
The only water meth injection system for diesel engines proven to increase fuel economy in all load states – empty or while towing. The Snow Performance MPG-MAX™ is available for all Cummins applications and comes with a proprietary injection boot for a clean custom install. The MPG-MAX utilizes a fully adjustable progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure and EGTs to increase your 6.7 Cummins performance. Proportionally injecting according to boost/EGTs gives a unparalleled delivery of water-methanol for all towing applications and provides the largest increases in MPG and cooling.

Built in modes (Power/Towing) allow the user to seamlessly switch between two programs for daily driven use (Power Mode) and while the vehicle is towing (Tow Mode).
The net effect is smooth power in all engine load states with no combustion quench resulting in a Fuel Economy Increase of 1-3 MPG, HP increase 65+, and reduced EGTs (100-350 F). The MPG-MAX offers true plug & play functionality that will not affect the electronics or the warranty of the vehicle. Complete with heads up adjustable LCD screen displaying boost, EGT temps, percentage of injection, and second stage activation for accurate monitoring and on the fly adjust-ability!

Benefits:

  • Made In USA
  • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
  • Increased Fuel Economy
  • Reduced EGTs 100-350 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 15 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Digital Variable Mapping Controller
  • EGT Probe
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Snow Performance Injection boot (Rated to 65 PSI)
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty
Snow Performance MPG-MAX Powerstroke (7.3 / 6.0 / 6.4 / 6.7) Water-Methanol Injection System Snow Performance MPG-MAXâ„¢ Duramax (LB7 / LLY / LBZ / LMM / LML) Water-Methanol Injection Kit
The only diesel water-methanol injection system proven to increase fuel economy in all load states – empty or while towing. The Snow Performance MPG-MAX™ is available for all Powerstroke applications and comes with a proprietary injection boot for a clean custom install. The MPG-MAX Powerstroke utilizes a fully adjustable progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure and EGTs. Proportionally injecting according to boost/EGTs gives an unparalleled delivery of water-methanol for all towing applications and provides the largest increases in MPG and cooling. The MPG-MAX will increase your 6.0 Powerstroke mpg, your 7.3 Powerstroke mpg, & more!

Built in modes (Power/Towing) allow the user to seamlessly switch between two programs for daily driven use (Power Mode) and while the vehicle is towing (Tow Mode).
The net effect is smooth power in all engine load states with no combustion quench resulting in a Fuel Economy Increase of 1-3 MPG, HP increase 65+, and reduced EGTs (100-350 F). The MPG-MAX diesel water injection kit offers true plug & play functionality that will not affect the electronics or the warranty of the vehicle. Complete with heads up adjustable LCD screen displaying boost, EGT temps, percentage of injection, and second stage activation for accurate monitoring and on the fly adjust-ability! Upgrade your 7.3, 6.4, 6.7 & 6.0 powerstroke's mpg with Snow Performance!
Check out the Snow Performance MPG-MAX 5.9 cummins water-methanol injection kit for your 5.9 cummins application as well.

Benefits:

  • Made In USA
  • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
  • Increased Fuel Economy
  • Reduced EGTs 100-350 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Digital Variable Mapping Controller
  • EGT Probe
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Snow Performance Injection boot (Rated to 65 PSI)
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty
Upgrade your Duramax MPG with the only system proven to increase fuel economy in all load states – empty or while towing. The Snow Performance MPG-MAX™ is available for all Duramax applications and comes with a propriatary injection boot for a clean custom install. The Snow Performance MPG-MAX Duramax (LB7 / LLY / LBZ / LMM / LML) water-methanol injection kit utilizes a fully adjustable progressive controller that commands two stages of water-methanol that proportionally inject more or less according to boost pressure and EGTs. Proportionally injecting according to boost/EGTs gives a unparalleled delivery of water-methanol for all towing applications and provides the largest increases in MPG and cooling.

Built in modes (Power/Towing) allow the user to seamlessly switch between two programs for daily driven use (Power Mode) and while the vehicle is towing (Tow Mode).
The net effect is smooth power in all engine load states with no combustion quench resulting in a Fuel Economy Increase of 1-3 MPG, HP increase 65+, and reduced EGTs (100-350 F). The MPG-MAX offers true plug & play functionality that will not affect the electronics or the warranty of the vehicle. Complete with heads up adjustable LCD screen displaying boost, EGT temps, percentage of injection, and second stage activation for accurate monitoring and on the fly adjust-ability!

Benefits:

  • Made In USA
  • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
  • Increased Fuel Economy
  • Reduced EGTs 100-350 Degrees
  • Increased HP 65+
  • Increased Boost
  • Cleans Engine Combustion Of Carbon Build Up
  • Reduced Emissions (Less Regen)
Whats In The Box:
  • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
  • All Tubing Necessary for Installation
    • 20 ft ¼ Inch High Temp Nylon Tubing
    • 36 Inches High pressure Boost Line
  • Digital Variable Mapping Controller
  • EGT Probe
  • Dual Nozzle Upgrade
  • Power Solenoid Upgrade
  • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
  • 2 Nozzle Holder/Check Valve Combo
  • 3 Snow Performance Hypersonic Nozzles to cover a wide range of HP
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Snow Performance Injection boot (Rated to 65 PSI)
  • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
  • Snow Performance 1-Year Warranty